---------------------
PatchSet 5782 
Date: 2007/09/11 01:42:36
Author: amosjeffries
Branch: squid3-ipv6
Tag: (none) 
Log:
Update NOTES-IPv6

Members: 
	NOTES-IPv6:1.1.2.66->1.1.2.67 

Index: squid3/NOTES-IPv6
===================================================================
RCS file: /cvsroot/squid-sf//squid3/Attic/NOTES-IPv6,v
retrieving revision 1.1.2.66
retrieving revision 1.1.2.67
diff -u -r1.1.2.66 -r1.1.2.67
--- squid3/NOTES-IPv6	31 Aug 2007 09:57:44 -0000	1.1.2.66
+++ squid3/NOTES-IPv6	11 Sep 2007 01:42:36 -0000	1.1.2.67
@@ -1,9 +1,9 @@
-$Id: NOTES-IPv6,v 1.1.2.66 2007/08/31 09:57:44 amosjeffries Exp $
+$Id: NOTES-IPv6,v 1.1.2.67 2007/09/11 01:42:36 amosjeffries Exp $
 
 NP: Any problems with this version of squid please contact
 	squid3@treenet.co.nz for assistance.
 
-NP: Cache transition from older squid to IPv6 as not been tested.
+NP: Cache transition from older squid to IPv6 has not been tested.
 	Any volunteers welcome. For the rest cache_dir's should be
 	built from an empty state in the usual manner.
 
@@ -48,9 +48,11 @@
 	I've found the time to sort it out (I think) and it appears to be going
 	well enough for some detailed tests.
 
+
 PROBLEM: Testers report that "using WebDAV against my Squid-accelerated Apache gives
 	 all sorts of odd timeouts" but tester unable to spend time tracing the cause.
 NP:	Need someone with a WebDAV setup and time to assist with test/debug cycle.
+	I suspect that it has to do with missing authentication support in IPv6.
 
 
 PROBLEM: Sockets created with IPv6 family gives "92 Protocol not supported" errors
@@ -123,14 +125,21 @@
 4.3	Write ICMPv6 engine (performs echo for peer-selection stats).
 
 4.4	Convert Auth modules to handle IPv6 addresses
-		requires conversion to C++
+		requires conversion to C++ or extensive use of sockaddr_storage++magic
+
+4.5	Get SNMP going and tested under IPv6
+	- Write SNMP for v6 details (client_db, etc)
+	- test access to existing SNMP data via v6 socket.
 
-4.6	Write "(src|dst)host" ACL types
+4.6	Write "(src|dst)6host" ACL types
 	- configured with ::0:0:0:0 (/64 bits for the host-part)
 	- matches the src/dst IPv6 ignoring the net-part (first 64 bits)
 	- IPv4 MUST 'fail' matching.
+	- this will provide a clean replacement for ACLARP under IPv6
+		also provides an ACL for src/dst on IPv6 Roaming or SHIM6 clients
 
 4.6	Write a Neighbour-Discovery auto-configuration component.
+	- DHCPv6?
 	- broad/multi-cast ICP?
 	- link/site-local broadcast (custom protocol)?