---------------------
PatchSet 2070 
Date: 2005/10/31 14:02:37
Author: serassio
Branch: nt
Tag: (none) 
Log:
Removed stupid uppercase README.txt

Members: 
	helpers/basic_auth/mswin_sspi/README.txt:1.1.2.1->1.1.2.2(DEAD) 

--- squid3/helpers/basic_auth/mswin_sspi/README.txt	Wed Feb 14 13:35:28 2007
+++ /dev/null	Wed Feb 14 13:33:00 2007
@@ -1,101 +0,0 @@
-This is a simple authentication module for the Squid proxy server running on Windows NT
-to authenticate users on an NT domain in native WIN32 mode.
-
-Usage is simple. It accepts a username and password on standard input
-and will return OK if the username/password is valid for the domain/machine,
-or ERR if there was some problem.
-It's possible to authenticate against NT trusted domains specifyng the username 
-in the domain\\username Microsoft notation. 
-
-
-==============
-Program Syntax
-==============
-
-mswin_auth [-A UserGroup][-D UserGroup][-O DefaultDomain][-d]
-
--A can specify a Windows Local Group name allowed to authenticate.
--D can specify a Windows Local Group name not allowed to authenticate.
--O can specify the default Domain against to authenticate.
--d enable debugging.
-
-This is released under the GNU General Public License.
-
-
-==============
-Allowing Users
-==============
-
-Users that are allowed to access the web proxy must have the Windows NT
-User Rights "logon from the network" and must be included in the NT LOCAL User Groups 
-specified in the Authenticator's command line. 
-This can be accomplished creating a local user group on the NT machine, grant the privilege,
-and adding users to it.
-
-Refer to Squid documentation for the required changes to squid.conf.
-
-
-============
-Installation
-============
-
-Type 'make', then 'make install', then 'make clean'.
-
-On Cygwin the default is to install 'mswin_auth' into /usr/local/squid/libexec,
-with other Windows environments into c:/squid/libexec.
-
-Refer to Squid documentation for the required changes to squid.conf.
-You will need to set the following line to enable the authenticator:
-
-auth_param basic program /usr/local/squid/libexec/mswin_auth [options]
-
-or
-
-auth_param basic program c:/squid/libexec/mswin_auth [options]
-
-You will need to set the following lines to enable authentication for
-your access list -
-
-  acl <yourACL> proxy_auth REQUIRED
-  http_access allow <yourACL>
-
-You will need to specify the absolute path to mswin_auth in the 
-'auth_param basic program' directive, and check the 'auth_param basic children'
-and 'auth_param basic credentialsttl'.
-
-
-==================
-Compilation issues
-==================
-
-The Makefile assumes that GCC is in the current PATH.
-mswin_auth compile ONLY on Cygwin Environment, MinGW + MSYS Environment
-or MS VC++.
-
-
-=======
-Testing
-=======
-
-I strongly urge that mswin_auth is tested prior to being used in a 
-production environment. It may behave differently on different platforms.
-To test it, run it from the command line. Enter username and password
-pairs separated by a space. Press ENTER to get an OK or ERR message.
-Make sure pressing <CTRL><D> behaves the same as a carriage return.
-Make sure pressing <CTRL><C> aborts the program.
-
-Test that entering no details does not result in an OK or ERR message.
-Test that entering an invalid username and password results in an ERR message.
-Note that if NT guest user access is allowed on the PDC, an OK message
-may be returned instead of ERR.
-Test that entering an valid username and password results in an OK message.
-Test that entering a guest username and password returns the correct
-response for the site's access policy.
-
-
-===============
-Contact details
-===============
-
-To contact the maintainer of this package, e-mail on squidnt@acmeconsulting.it.
-